mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Body and Frame|Seats > < Power Sunroof - Slide or Tilt Inoperative
Page 2
background image

3.

Remove the overhead console according to the instructions in section M of the BETM.

4.

Remove the two (2) phillips head screws that retain the button to the console.

5.

Use a small screwdriver to carefully pry the button from the side to remove it from the console.

6.

Inspect the underside of the button.

^

If the button is damaged, replace only the button.

^

If no damage is present, refer to the BETM or workshop manual for troubleshooting and repair procedures.

7.

Install overhead console according to the BETM.

8.

Verify repair.

PARTS INFORMATION

WARRANTY INFORMATION

(Applies To Verified Customer Complaints On Vehicles Covered Under Normal Warranty. Refer to The SRT Microfiche For Warranty Term
Information.)

Warranty Type:

A

Symptom code:

41

Damage Code:

5A

Part Number Main Cause:

See Parts Information

Quantity:

1

Operation Number:

YY0245RX

Labor Hours:

0.3 Hrs.

DISCLAIMER

Body and Frame|Seats > < Power Sunroof - Slide or Tilt Inoperative