mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

ABOUT US
Automatic Transmission|Page 7365 > < Water Temperature Gauge <--> [Temperature Gauge]|Testing and Inspection

MX-6 L4-1991cc 2.0L DOHC (1993)

  • Lighting and Horns
  • Backup Lamp
  • Backup Lamp Switch
  • Component Information
  • Testing and Inspection
  • Automatic Transmission

Page 1
background image

Backup Lamp Switch: Testing and Inspection
Automatic Transmission

INHIBITOR SWITCH (ATX)

Inspection
1. Disconnect the inhibitor switch connector.
2. Shift the transaxle reverse.
3. Check continuity between terminals C and I of the inhibitor switch.
4. If there is not continuity, replace the inhibitor switch.

  • Lighting and Horns
  • Backup Lamp
  • Backup Lamp Switch
  • Component Information
  • Testing and Inspection
  • Automatic Transmission

Automatic Transmission|Page 7365 > < Water Temperature Gauge <--> [Temperature Gauge]|Testing and Inspection