mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

High Mounted Stop Lamp - Rattling Noise|Page 7419 > < High Mount Stop Lamp - Service Procedure|Page 7414
Page 1
background image

Center Mounted Brake Lamp: All Technical Service Bulletins
High Mounted Stop Lamp - Rattling Noise

Bulletin No.: 003/93
Issued: 2/12/93
Revised

Category
S

Applicable Model/s 
1993 MX-6 (w/o OEM spoiler)

Subject:
RATTLING NOISE FROM THE HIGH-MOUNTED STOP LAMP

AFFECTED VINS

This bulletin applies to vehicles with a VIN of 1YVGE31B1P5163778 or lower produced through October 26, 1992.

This bulletin does not apply to vehicles with a VIN equal to or greater than 1YVGE31B1P5163779 and produced after October 26, 1992.

DESCRIPTION

On some vehicles, a rattling noise may be heard from the High-Mounted Stop Lamp located on the rear package tray.

REPAIR PROCEDURE

If the above condition occurs, refer to the following repair procedure:

1.

Remove the High-Mounted Stop Lamp cover. Figure 1.

2.

Remove the High-Mounted Stop Lamp unit from the bracket holder by removing the two front bolts. Figure 1.

High Mounted Stop Lamp - Rattling Noise|Page 7419 > < High Mount Stop Lamp - Service Procedure|Page 7414