MX-6 L4-1991cc 2.0L DOHC (1993)
3.
Remove the bracket holder. Bend the top portion of the bracket 3 mm (from point A to point B. Figure 2.
4.
Place a piece of foam tape along the bottom mating surface area of the High-Mounted Stop Lamp unit (250 mm long x 10 mm wide x 2 mm thick).
Figure 3.
5.
Reinstall the High-Mounted Stop Lamp in the reverse order of removal.
WARRANTY INFORMATION
(Applies to vehicles covered under warranty.)
Warranty Type Code:
A
Customer Comment Code:
83
Damage Code:
N/A
Part No. of Main Cause:
GE69 51 598
Operation No:
YY0099RX
Labor Hours:
0.5 hrs.