MX-6 L4-1991cc 2.0L DOHC (1993)
Distributor: Service and Repair
Removal/ Installation
REMOVAL
Distributor R&R
1.
Remove components in order shown.
2.
Install in reverse order.
INSTALLATION NOTE
Distributor Matching Marks
1.
Verify that No. 1 cylinder is at TDC and align distributor matching marks.
2.
After installation, set ignition timing and tighten lock bolt to 14 - 18 ft lb (19 - 25 Nm).
COMPONENTS
1.
Battery cable
2.
Fresh air duct
3.
Air cleaner housing
4.
High tension lead
5.
Connector
6.
Distributor
