MX-6 L4-1991cc 2.0L DOHC (1993)
7. Remove the three accumulator body assembly bolts.
8. Remove the accumulator body, separator plate, and gaskets from the valve body assembly. Discard the gaskets.
9. Remove the valve body, separator plate and gaskets from the transfer plate. Discard the gaskets.
10. Inspect all parts and repair or replace as necessary.
Assembly
CAUTION:
-
Before assembly, make sure all parts are perfectly clean.
-
Apply ATF to all parts.
-
Do not reuse the gaskets or O-rings.
