MX-6 L4-1991cc 2.0L DOHC (1993)
Boot (wheel side)
1. Fill the boot with the grease supplied in the boot kit.
Grease amount
FS engine: 90-11O g (3.1-3.88 oz)
KI engine: 13-15O g (4.5-5.29 oz)
2. Slide the boot onto the shaft.
Cage, Inner Ring and Balls/Snap Ring
1. Align the marks and install the balls and cage to the inner ring in the direction shown in the figure.
2. Install a new snap ring.
Boot (difterential side), Outer Ring, Clip
1. Fill the boot and outer ring with the grease supplied in the boot kit and joint kit.
Grease Amount
FS engine: 120-140 g (4.24-4.94 oz)
KL engine: 140-160 g (4.94-5.64 oz)