MX-6 L4-2184cc 2.2L SOHC Turbo F2 (1989)
1.
4 & 5-Door Models
A)
Open front door and remove the fixing screw from the lower side of the drip molding.
B)
For 4 & 5-Door models, remove original screw boss ftom pillar and discard.
C)
Install a protector between the drip molding and the "A"-pillar.
D)
Reinstall the fixing screw and insert the protector inside the cavity of the front fender.
2.
MX-6
A)
Cut the boss off of the protector.