MX-6 L4-2184cc 2.2L SOHC Turbo F2 (1989)
SPOOL VALVE REPLACEMENT PROCEDURE
1.
Lift up the vehicle on a hoist.
2.
Remove the spool valve plug using 19 mm swivel socket and a 6 in. extension.
3.
Remove the spring and spool valve with a small pencil magnet.
4.
Insert the new spool valve into the oil pump with the partially closed end pointing outward.
5.
Insert the spring until it becomes flush with the oil pump housing.
6.
Replace the copper washer on the spool valve plug and reinstall the plug onto the oil pump housing. Tighten the plug by the specified torque.
Specified Torque:
2.4-3.6 m-kg (17-25 ft. lbs.)
7.
Check the ATF level, and add fluid if necessary.
8.
Recheck the line pressure and adjust if necessary.
Specification:
4.4-4.6 kg/cm(2) (63-66 psi)
PARTS INFORMATION
PART NUMBER DESCRIPTION
FU02 19 735F
Oil Pump Spool
FU02 19 738A
Copper Washer
VIN OF PRODUCTION CHANGE
1990 626/MX-6 vehicles manufactured in the U.S.A.:
WARRANTY INFORMATION
Warranty Type Code:
A
Customer Comment Code:
99
Damage Code:
99
