mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Glove Box Lid - Squeaks On Opening/Closing|Page 5689 > < Air Bag(s) Arming and Disarming|Service and Repair
Page 1
background image

Glove Compartment: All Technical Service Bulletins
Glove Box Lid - Squeaks On Opening/Closing

Bulletin No.: O32/95
Issued: 10/17/95
Revised

Category 

S

Applicable Model/s: 
1993-95 MX-6

Subject: 
GLOVE BOX LID SQUEAK DURING OPERATION (Cold Weather)

APPLICABLE MODELS/VINS

All 1993-95 MX6 vehicles with a VIN of 1YVGE31**S5389217 and lower

DESCRIPTION

A squeak noise may be heard when opening or closing the glove box lid during cold weather. If a customer complains of This noise, follow the
instructions below to correct This concern.

REPAIR PROCEDURE

1.

Verify the complaint.

2.

Remove the glove box assembly. Refer to section S of the workshop manual.

3.

Push the roll pin from The hinges with a suitable tool.

NOTE: 

Mark right and left hinges to ensure proper installation.

Glove Box Lid - Squeaks On Opening/Closing|Page 5689 > < Air Bag(s) Arming and Disarming|Service and Repair