MX-6 V6-2496cc 2.5L DOHC (1996)
Cruise Control: Service Precautions
Audio Anti-Theft System Deactivation
The audio system's anti-theft feature renders the system inoperable after power has been interrupted. Deactivating the anti-theft function prior to
performing repairs will ensure restoration of audio system operation in case the battery is disconnected or power is lost during repairs.
Use caution when performing any repair that may involve the audio unit. The anti-theft system protection can be activated by disconnecting the
battery cable, audio unit connectors, or a discharged battery. If three consecutive errors occur, including, but not limited to, turning the
ignition switch to the Off position and disconnecting the audio unit, the anti-theft system will activate and render the audio unit completely
inoperative. Always have ignition in the Accessory position when removing audio unit connectors.
1. Turn ignition switch to Accessory position, then turn audio unit off. "Code" appears on display.
2. Simultaneously press SCAN and AUTO-M buttons for 1.5 seconds until bars appear on display.
3. Use channel buttons 14 to enter code in each position respectively. If code is not entered within ten seconds, display is deleted and procedure must
be repeated.
4. With code number displayed, press and hold SCAN and AUTO-M buttons for 1.5 seconds until beep is heard. "Code" will be displayed for five
seconds and then disappear to indicate audio unit is operative.
