MX-6 V6-2496cc 2.5L DOHC (1996)
High-Tension Lead: Technical Service Bulletins
Spark Plug Wire - Resistance Specifications
Bulletin No.: 006/97
Issued: 10/31/97
Revised:
Category
G
Applicable Model/s
See Table Below
Subject:
SPARK PLUG WIRE RESISTANCE SPECIFICATIONS
DESCRIPTION
The OE (black colored) spark plug wires have been modified to improve durability. When diagnosing a concern and the spark plug wires are the
suspected cause, check each wire's resistance according to the table shown prior to replacement.
NOTE:
The specifications listed DO NOT apply to replacement spark plug wires (NGK, blue colored). Service Managers should place a copy of this bulletin
in the appropriate workshop manual.
MODIFICATION I.D.
The modified spark plug wires have a modification mark or are made using a different material. Refer to the illustration to identify the modified plug
wires.
1.
A small 1 mm dimple on the plastic extender next to the numbers.
2.
The plug wire's extender has a glossy finish.
3.
The plug wire's extender is rubber material.
Disclaimer