MX-6 V6-2496cc 2.5L DOHC (1996)
Idle Speed: Adjustments
Idle Speed
ADJUSTMENT PREPARATION
1. Warm up the engine to normal operating temperature.
2. Shift the selector lever to park(neutral position.
3. Turn off all electrical loads.
-
Headlight
-
Blower motor
-
Rear window defroster
-
A/C
-
Power steering
4. Wait until the cooling fan stops.
5. Connect the Special Service Tools (SST)s New Generation Star (NGS) tester to the data link connector-2 and select the PID DATA MONITOR
AND RECORD function.
IDLE SPEED
1. Perform "Preparation".
2. Verify that the idle speed is within the specification.
Specification: 600-700 rpm
3. If not as specified, connect the SST (system selector) to the data link connector.
4. Set switch GA to position 1.
5. Set the test switch to SELF TEST.
CAUTION: The throttle adjusting screw is set at the factory and must not be adjusted. Any adjustment will negatively effect the engine
performance.
6. Adjust the idle speed by turning the air adjusting screw.
Specification: 600-700 rpm
