MX-6 V6-2496cc 2.5L DOHC (1996)
Spark Plug: Service and Repair
SPARK PLUG REMOVAL / INSTALLATION
1. Remove and install the high-tension leads carefully.
Spark Plug Wire Removal
CAUTION: Pulling on the wire part of the spark plug lead may break it. To remove the lead, pull only on the boot.
2. Remove and instal the spark plugs with a plug socket.
Install Spark Plug Socket Squarely Over Spark Plugs
CAUTION: To avoid breaking the spark plug, be sure to fit the socket squarely over it.
3. Apply anti-seize compound or molybdenum-based lubricant to the spark plug threads.
4. Tighten the spark plug to the specified torque.
Spark plug gap: 1.0-1.1 mm (0.040-0.043 in.)
Tightening torque: 15-22 Nm (11-16 ft.lbs.)