mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Bypass Air Control (BAC) Valve|Page 2612 > < Bypass Air Control (BAC) Valve|Page 2610
Page 1
background image

Idle Air Control Valve: Service and Repair

INTAKE-AIR SYSTEM COMPONENT PARTS
Removal / Inspection / Installation

WARNING:
^

Fuel vapor is hazardous. It can very easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel.

^

Fuel line spills and leaks are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin and
eyes. To prevent this, always complete the "Fuel Pressure Release Procedure"
.

1. Remove in the order shown in the figure, referring to Removal Note.
2. Inspect all parts and repair or replace as necessary.
3. Install in the reverse order of removal, referring to Installation Note.

1. Fresh-air duct
2. Air cleaner
3. Volume air flow sensor
4. Air intake hose
5. Accelerator cable
6. Fuel pipe
7. Intake manifold  
8. Throttle body 
9. BAC valve  

10. Air intake pipe 
11. Fuel distributor

Bypass Air Control (BAC) Valve|Page 2612 > < Bypass Air Control (BAC) Valve|Page 2610