MX-6 V6-2496cc 2.5L DOHC (1996)
2. Install a fuel pressure gauge. (Install clamps as shown.)
3. Connect the negative battery cable.
Data Link Connector
4. Connect the data link connector terminals F/P and GND with a jumper wire.
5. Turn the ignition switch to ON.
6. Measure the fuel line pressure.
Fuel line pressure 270-310 kPa (39-45 psi)
Pressure low -
Measure fuel pump maximum pressure. If as specified, fuel line or fuel filter might be clogged or restricted.
Pressure high -
Replace pressure regulator.