mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Bypass Air Control (BAC) Valve|Page 194 > < Bypass Air Control (BAC) Valve|Page 192
Page 2
background image

REMOVAL NOTE
Fuel hose

WARNING: Fuel line spills and leaks are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate
skin and eyes. To prevent this, always complete the "Fuel Line Safety Procedures"
.

Water hose

1. Loosen the drain plug and drain the coolant from the radiator. 
2. Remove the water hose from the BAC valve.
3. After installation of the throttle body, refill the radiator. 

INSTALLATION NOTE
Air intake pipe

1. Apply a small amount of clean engine oil to new 0-rings before installing them.
2. Install the air intake pipe.

Tightening torque: 7.9-10.7 Nm (70-95.4 in.lbs.)

Bypass Air Control (BAC) Valve|Page 194 > < Bypass Air Control (BAC) Valve|Page 192