MX-6 V6-2496cc 2.5L DOHC (1996)
3. Check for continuity between the clock spring terminals.
4. If not as specified, replace the clock spring.
5. Connect the blue and orange clock spring connectors.
6. Verify that pin B of the clock spring connector (harness-side) is not broken.
7. If pin B is broken, replace the air bag harness.
8. Verify that pin B of the driver-side air bag module connector (on clock spring) is not broken.
9. If pin B is broken, replace the clock spring.
10. Disconnect the diagnostic module connector.
11. Connect the blue and orange clock spring connectors.
12. Check for continuity between terminals B and C of the clock spring.
13. If there is continuity, replace the clock spring.
