MX-6 V6-2496cc 2.5L DOHC (1996)
1. Use a chisel and a hammer to make a groove in the heads of the steering lock mounting bolts.
2. Remove the bolts by using a screwdriver.
3. Remove the steering lock assembly.
Tie-Rod End Ball Joint
1. Remove the tie-rod nut.
2. Separate the tie rod end from the steering knuckle by using the SST.
Engine Mount
1. Use the SST as shown.
2. Remove the engine mount.
Steering Gear and Linkage
Pull the steering gear from the right side to remove it.
STEERING GEAR
INSPECTION
Tie Rod End