MX-6 V6-2496cc 2.5L DOHC (1996)
2.
Apply grease to the following areas (Refer to Fig. 1):
^
Top of the dust cover.
^
Between the rubber bump stopper and the dust cover.
NOTE:
^
Before applying grease remove any rust or contamination from the interference area.
^
Do not use grease lubricants that may damage rubber. Use only commercially available silicone-based grease.
^
Spray lubricants that may wash off with road spray are not recommended.
3.
Slide the dust-cover and rubber bump stopper to the top of the strut rod.
4.
Lower the vehicle and road test to confirm repair.
WARRANTY INFORMATION
(Applies To Verified Customer Complaints On Vehicles Covered Under Normal Warranty. Refer To The SRT Microfiche For Warranty Term
Information.)
Warranty Type:
A
Symptom Code:
82
Damage Code:
97
Part Number Main Cause:
GJ21 34 015
Quantity:
0
Operation Number:
YY0248RX
Labor Hours:
0.5 Hrs. (includes test drive and cost of grease)