MX-6 V6-2496cc 2.5L DOHC (1996)
6. Install the SSTs as shown in the figure.
7. Set the six SSTs in the positions shown.
8. Set the transaxle case on the SSTs (selectors).
9. Tighten the SSTs (bolts) to 38 - 51 Nm (28 - 38 ft. lbs.).
10. Turn the SST (selector) to increase the clearance (arrow) by using the SST (bars), until it no longer turns.
11. Turn the selector in the opposite direction until the preload is eliminated (gap is reduced).
12. Insert the SST through the oil seal hole of the transaxle case and attach it to the pinion shaft.
