MX-6 V6-2496cc 2.5L DOHC (1996)
Input/Turbine Speed Sensor: Component Tests and General Diagnostics
INPUT/TURBINE SPEED SENSOR
Inspection Of Resistance
1. Refer to Service and Repair for disconnection of the input/turbine speed sensor connector.
Measure Resistance Between The Terminals Of The Sensor
2. Measure resistance between the terminals of the input/turbine speed sensor.
Resistance: 253-6O4 Ohms @ (ATF temperature) -40-16O°C (-4O-32O°F)
3. If not correct, replace the input/turbine speed sensor.
4. Refer to Service and Repair for connection of the input/turbine speed sensor connector.
