MX-6 V6-2496cc 2.5L DOHC (1996)
Drive/Propeller Shaft: Service and Repair
Disassembly
Automatic Transaxle
Disassemble driveshaft in numerical order Fig. , noting the following:
Fig. 21 Exploded View Of Driveshaft
1. Disassemble tripod joint as follows:
a. Remove snap ring using snap ring pliers, then remove tripod joint bearing.
b. Disassemble joint shaft assembly.
Manual Transaxle
Disassemble driveshaft in numerical order, Fig. 20, noting the following: