MX-6 LS V6-2.5L DOHC (1997)
Parking Brake Lever: Service and Repair
1. Block the wheels firmly.
2. Release the parking brake.
3. Remove in the order shown in the figure.
4. Inspect all components and parts. Replace any parts if necessary.
5. Install in the reverse order of removal. Install the parking brake switch so that it contacts the parking brake lever when the lever is fully released.
6. Adjust the parking lever stroke. See: Adjustments
7. Turn the ignition switch to ON, and verify that the parking brake warning light comes on when the lever is pulled up one notch.
