MX-6 LS V6-2.5L DOHC (1997)
Charcoal Canister: Testing and Inspection
Inspection
1. Remove the charcoal canister.
2. Visually check the charcoal canister for damage and leakage.
3. Blow through each port and verify that air flows.
4. Shake the charcoal canister upside down and verify that no pieces of charcoal falls from either nipple.
5. Replace the charcoal canister if necessary.
6. Verify that there is no clog in the hoses between the charcoal canister and check valve, and between the charcoal canister and purge solenoid valve
.
7. Replace the hoses if necessary.