mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

ABOUT US
Transaxle Fluid Temperature Sensor <--> [Transmission Temperature Sensor/Switch, A/T]|Specifications|Page 2931 > < Transaxle Fluid Temperature Sensor <--> [Transmission Temperature Sensor/Switch, A/T]|Specifications|Page 2929

MX-6 LS V6-2.5L DOHC (1997)

Page 1
background image

Transaxle Fluid Temperature Sensor: Service and Repair

Replacement

1. Remove the control valve body cover.
2. Disconnect the transaxle fluid temperature sensor connector.

3. Remove the transaxle fluid temperature sensor by using the Special Service Tool (SST).
4. Install a new transaxle fluid temperature sensor by using the SST.

Tightening torque: 7.9-10.7 Nm (70-95.4 in.lbs.)

5. Connect the transaxle fluid temperature sensor connector.
6. Install the control valve body cover.
7. Carry out the line pressure test.

Transaxle Fluid Temperature Sensor <--> [Transmission Temperature Sensor/Switch, A/T]|Specifications|Page 2931 > < Transaxle Fluid Temperature Sensor <--> [Transmission Temperature Sensor/Switch, A/T]|Specifications|Page 2929