MX-6 LS V6-2.5L DOHC (1997)
Spark Plug: Service and Repair
Removal / Installation
1. Remove and install the high-tension leads carefully.
CAUTION:
^
Pulling on the wire part of the spark plug lead may break it. To remove the lead, pull only on the boot.
2. Remove and install the spark plug with a plug socket.
CAUTION:
^
To avoid breaking the spark plug, be sure to tit the socket squarely over it.
3. Apply anti-seize compound or molybdenum-based lubricant to the spark plug threads.
4. Tighten the spark plug to the specified torque.
Tightening torque:
15-22 N.m {1.5-2.3 kgf.m, 11-16 ft.lbf}