MX-6 LS V6-2.5L DOHC (1997)
Passenger-side Air Bag Module
Passenger-side Air Bag Module
1. Remove the glove compartment.
2. Disconnect the orange and blue passenger-side air bag module connector.
Passenger-side Air Bag Module
3. Inspect the SST
4. Connect the SST to the passenger-side air bag module.
Passenger-side Air Bag Module
4. Connect the red clip of the SST to the positive battery terminal and the black clip to the negative terminal.
5. Verify that the red light on the SST is illuminated.
6. Make sure all persons are standing at least 6 m {20 ft} from the vehicle.
7. Press the activation switch on the SST to deploy the air bag.
