MX-6 LS V6-2.5L DOHC (1997)
7. Measure the pinion preload.
^
Rack position: Center +90°
^
Pinion preload: 1.2 - 1.5 Nm (11 - 13 inch lbs.)
^
Pull scale reading: 12 - 15 N (2.8 - 3.3 lbs.)
8. If not within specification, repeat steps 2 - 6.
9. Tighten the locknut to 49 - 58 Nm (37 - 43 ft. lbs.) while holding the adjusting cover by using the SST.