MX-6 LS V6-2.5L DOHC (1997)
ABS Wheel-Speed Sensor Harness Note
^
Install the ABS wheel-speed sensor harness bracket in the direction shown.
3. Install the wheels and tighten to 80 - 117 Nm (66 - 86.7 ft. lbs.).
4. Adjust the front wheel alignment.
Using Special Service Tool 49 T034 1A0
DISASSEMBLY
^
Disassemble in the order shown in the illustration, referring to the following note:
Piston Rod Nut
WARNING: Removing the piston rod nut is dangerous. The shock absorber and spring could fly off under tremendous pressure and
cause serious injury or death. Secure the shock absorber in the Special Service Tool (SST) before removing the piston rod nut.
CAUTION: To prevent damage to the shock absorber, use protective plates in the vise jaws.
A. Secure the shock absorber in a vise.
B. Loosen the nut several turns, but do not remove it.
