MX-6 LS V6-2.5L DOHC (1997)
10. Tighten the bolts evenly and gradually in the order shown to 8.1 - 10.9 Nm (72 - 97 inch lbs.).
11. Install the oil pump shaft and verify smooth oil pump operation.
12. Apply petroleum to the new seal rings and install them onto the oil pump cover. Seal ring inner diameter is 55.9 mm (2.20 inch).
13. Apply petroleum jelly to the bearing race and secure it onto the oil pump cover. Bearing race outer diameter is 88.0 mm (3.46 inch).
