mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

ABOUT US
Clutch Housing <--> [Bell Housing, M/T]|Disassembly|Page 3446 > < Clutch Housing <--> [Bell Housing, M/T]|Specifications|Page 3443

MX-6 LS V6-2.5L DOHC (1997)

Page 1
background image

Clutch Housing: Service and Repair
Disassembly

NOTE:  The oil seals do not need to be removed unless you are replacing them.

Disassemble in the order shown in the illustration, referring to following notes:

Oil seal (primary shaft)

CAUTION:  The clutch housing is made of aluminum, and is therefore easily dented and scratched by metal tools. When removing the oil seal,
keep contact with the clutch housing to a minimum.

Clutch Housing <--> [Bell Housing, M/T]|Disassembly|Page 3446 > < Clutch Housing <--> [Bell Housing, M/T]|Specifications|Page 3443