Navajo 2WD V6-4.0L OHV (1992)
^
As a guideline, if the weather-strip contact is insufficient, the door hinge(s) should be adjusted 2-4 mm inward. Determine the amount of movement
by outlining the hinge mount area before door adjustment and after.
^
Adjusting one hinge at a time will prevent any extreme door movement. This is done by loosening the hinge bolts and moving the door with a padded
pry bar just enough to permit movement of the door.
^
Hinges should be adjusted first, followed by the striker.
^
Adjustment to the rear door(s), if applicable, may require adjustments to the front door and possibly to the front fender to maintain alignment.
^
Door closing effort should be checked to ensure that it remains acceptable after adjustments are completed. If any doors are too difficult to close, the
seal compression may be excessive and adjustment will need to be repeated.
^
After completing adjustments, verify seal compression by using the card test and white grease test.
