mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Customer Interest for Engine Control Module:|F00294 > < Exhaust - Sulfur Odor
Page 2
background image

3.

FOR 1991 MODEL VEHICLES: Future diagnosis of the vehicle's fuel and emission system will require the instructions in the Powertrain
Management/Computers and Control Systems. This information must be noted in the vehicle and remain a permanent record for the owner. This
should be indicated in pen on the new EEC processor and noted in the owner's manual.

4.

Verify repair.

WARRANTY INFORMATION 
(Applies To Vehicles Covered Under Normal Warranty)
Warranty Type:

A

Customer Comment Code:

84

Damage Code:

9H

Replacement Of EEC Processor
Part Number Main Cause:

ZZLF 18 881 or ZZLG 18 881

Quantity:

1

Operation Number/Labor Hours:

F0003XDX / 0.5Hrs. (EEC Diagnostics)
F0812XRX / 0.6Hrs. (Replace EEC Processor)

Replacement Of Catalytic Converter (Claim Only If EEC Processor Was Previously Replaced)
Part Number Main Cause:

ZZLO 20 600

Quantity:

1

Operation Number/Labor Hours:

F0003XDX / 0.5Hrs. (EEC Diagnostics)
F0702XRX / 0.8Hrs.(Replace Catalytic Converter)

Customer Interest for Engine Control Module:|F00294 > < Exhaust - Sulfur Odor