mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Sensors and Switches - Accessories and Optional Equipment > < Rear Speakers - Intermittent or No Sound
Page 2
background image

5.

Install the replacement speaker(s). Reposition the left speaker one (1) screw position (+/- 1205) clockwise. Reposition the right speaker one (1)
screw position (+/- 1205) counter-clockwise. Figure 2. The speaker terminals should face away from the luggage compartment area.

If only one (1) speaker needs replacement, be sure to reposition the other speaker.

6.

Reinstall the three (3) screws on each speaker.

7.

Reinstall the rear package trim and fasteners.

8.

Due to the change of speaker position, a short cord has been established as a service part (see Parts Information). Connect the new short cord to
the speaker harness and speakers.

9.

Secure the new short cord to the harness with tape.

10.

Turn on the radio and check speaker operation.

PARTS INFORMATION

WARRANTY INFORMATION
(Applies to vehicles covered under normal warranty)

Sensors and Switches - Accessories and Optional Equipment > < Rear Speakers - Intermittent or No Sound