Engine Mount: Customer Interest for Engine Mount: Vibration at Idle
5.
Torque the Engine Mount No. 2 center bolt to 86-116 N-m (63-86 ft.lb.). Figure 5.
6.
Run the engine until warm and check for vibration. Check for interference from any components in the engine area that can be a path of vibration
from the engine to the body. Ensure that the radiator is centered and the lower radiator mount is fully seated.
WARRANTY INFORMATION
(Applies to vehicles covered under warranty.)
Warranty Type Code:
A
Customer Comment Code:
83
Damage Code:
9H
Part No. of Main Cause:
GA2A 39 050
Operation No:
YY0098RX
Labor Hours:
0.2 Hrs. (inspection only) 0.8 Hrs. (includes inspection and repair)