Protege L4-1839cc 1.8L DOHC (1990)
1. Use the SST to install a new seal ring to the valve part of the pinion shaft.
2. After installing it, use the SST to seat it properly.
3. Use the SST to install the pinion shaft assembly to the gear housing.
Plug
1. Use the SST to press in a new oil seal.
2. Press in by placing the flat plate against the bearing.
Caution: Apply grease to the oil seal and bearing.
3. Use the SST to tighten the plug to the gear housing.
Adjusting Cover