Protege L4-1839cc 1.8L DOHC (1990)
Pinion Gear: Service and Repair
DISASSEMBLY / ASSEMBLY
1. Disassemble in the order indicated in the illustration, referring to disassembly note.
2. Assemble in the reverse order of disassembly indicated in the illustration, referring to assembly procedure.
Disassembly Note
Bearings (3)
Remove the bearings from the output gear by using the Special Service Tool (SST).
Assembly Procedure
1. Press the new bearings onto the output gear by using the SST.
NOTE: Do not damage the seal ring when installing it.