Protege L4-1839cc 1.8L DOHC (1990)
Throttle Valve Cable/Linkage: All Technical Service Bulletins
Throttle Cable Bracket - Modification, Adjust Procedure
Category K*
Applicable Model/s 1990 323/Protege'
Subject THROTTLE CABLE BRACKET ADJUSTMENT
Bulletin No.
007/90
Issued
12/19/90
Revised
DESCRIPTION
The throttle cable and bracket have been modified to improve accuracy and simplify adjustment on the production line. As a result, the adjustment
method has changed also. When removing the throttle cable or any parts that the throttle cable is attached to, adjust the line pressure according to the
procedure in this bulletin.
VIN OF PRODUCTION CHANGE
JMIBG***L0185254
June 1, 1990
PARTS INFORMATION
PART NUMBER
DESCRIPTION
MODEL
NEW
OLD
FU63 21 600H
FU63 21 600D
Throttle Cable Assembly
Protege' (1.8 SOHC)
FU64 21 600L
FU64 21 600D
Throttle Cable Assembly
Protege' (1.8 DOHC)
FU67 21 600H
FU67 21 600D
Throttle Cable Assembly
323 (1.6 SOHC)
BP02 13 665A
B6S8 13 665B
Acceleration Wire Bracket
*
This bulletin has been revised from Category B, no. 005/90.
ADJUSTMENT PROCEDURE
When adjusting only the line pressure, loosen bolt "B" and follow steps 5 thru 8.
1.
When reassembling components, assemble all parts except the throttle cable.
2.
Install the inner cable end to the throttle cable.
