Protege L4-1839cc 1.8L DOHC (1990)
Fluid - M/T: Service and Repair
TRANSAXLE OIL REPLACEMENT
1. Disconnect the speedometer cable and remove the speedometer driven gear.
2. Remove the drain plug and washer. Drain the oil into a suitable container.
3. Install a new washer and the drain plug.
Tightening torque:
39-59 N.m (4.0-6.0 m-kg, 29-43 ft-lb)
4. Add the necessary amount of the specified oil through the speedometer gear case hole.
Specified oil
Grade: API service GL-4 or GL-5
Viscosity:
All-season DEXRON-ll or M2C33F
Above 0°F (-18°C) SAE 80W-90
Capacity: 3.35 liters (3.55 US qt, 2.96 Imp qt)
5. Verify the oil level is between "F" and "L".