Protege L4-2.0L DOHC (2003)
Keyless Entry Module: Service and Repair
Keyless Entry Module Removal/Installation
Sedan
KEYLESS CONTROL MODULE REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the rear package trim.
3. Disconnect the keyless control module connector.
4. Remove the nut and bolt to remove the keyless control module and the bracket as a module.
5. Remove the screw.
6. Push the stopper using a small driver, and remove the bracket.
7. Install in the reverse order of removal.
Hatch Back
KEYLESS CONTROL MODULE REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Disconnect the keyless control module connector. (Under driver's side dash)
3. Remove the bolt to remove the keyless control module and the bracket as a module.