Protege L4-2.0L DOHC (2003)
10.
Disconnect negative battery cable and wait for more than 1 minute to discharge air bag system.
11.
Detach seat control connectors and Yellow side air bag module connector (if equipped) from bracket by depressing the tips inward.
12.
Disconnect seat control harness connector.
13.
Disconnect the Yellow side air bag module harness connector (if equipped).
14.
Carefully remove seat from vehicle and place upside down on a clean blanket or fender cover.
15.
Remove rear of seat cushion trim by detaching seat cushion trim j-hook from metal tabs at rear of seat cushion frame.
16.
Remove seat cushion frame bolts (4).
