Protege L4-2.0L DOHC (2003)
Map Light: Service and Repair
Interior and MAP Light
INTERIOR AND MAP LIGHT REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove in the order indicated below.
1. Lens (See Lens Removal Note)
2. Interior light bulb
3. Map light bulb
4. Screw
5. Interior and map light
6. Connector
3. Install in the reverse order of removal.
Lens Removal Note
1. Insert a tape-wrapped, flathead screwdriver into the service hole.
2. Twist the flathead screwdriver in the direction indicated by the arrow to remove the lens.
