Protege L4-2.0L DOHC (2003)
5. Attach the lock clip the quick release connector in the direction of the fuel distributor and lock it, as shown in the figure.
Fuel Injector Installation Note (FS only)
1. Install each fuel injector as indicated in the table.
2. Use new fuel injector O-ring.
3. Apply a small amount of engine oil to the O-ring and install them into the fuel distributor.
4. Verify that the O-ring and the fuel injector sealing surfaces are free of foreign material. Clean with gasoline if necessary.
5. Align the fuel injector notch with the fuel distributor and install the fuel injectors in the fuel distributor with light twisting motion so that the
O-ring will not be folded.