Protege L4-2.0L DOHC (2003)
4. Inspect for an open or short circuit in the following wiring harnesses by probing the applicable sensor and SST(104 Pin Breakout Box) terminals
with ohmmeter leads.
Open circuit
-
GND circuit (Fuel pump unit connector terminal D and body GND)
-
Power circuit (Fuel pump relay connector terminal C and fuel pump unit connector terminal B through common connector)
Short circuit
-
Fuel pump relay connector terminal C and fuel pump unit connector terminal B through common connector to GND
5. Repair or replace faulty areas.
6. Reconnect the fuel pump unit connector.
7. Install the service hole cover.
8. Install the rear seat cushion.
9. Reconnect the negative battery cable.