Protege L4-2.0L DOHC (2003)
12.
Enter the current calibration number in the PCM part number section of the screen (see list shown).
NOTE:
You need to highlight the second box to enter the remaining two suffix digits.
NOTE:
These are the only 2003 model year calibration numbers that require an updated calibration for this issue.
13.
Press tick.
14.
When screen shows, "Only" if this is the vehicle you're working on, press YES. If this screen does not appear, abort this process and recheck and
enter calibration number.
15.
When the run engine management diagnostic screen appears, press tick.
16.
When screen shows VIN and R.O., press tick.
17.
Select "TOOL BOX", "Module Reprogramming", then press tick.
18.
PLEASE WAIT screen appears.
19.
Select "Module Reprogramming", "PCM ",then press tick.
20.
When the "another calibration is available" screen appears confirm that the file name and new part number are correct by using the list shown.
21.
If the above is correct, press YES.
22.
After reading PCM Reprogramming screen NOTE, press tick.
