Protege L4-2.0L DOHC (2003)
Wheel Fastener: Service and Repair
WHEEL HUB BOLT REPLACEMENT
1. Remove the hub bolt using the SSTs.
Note:
^
If the dust cover interferes with the wheel hub bolt and the wheel hub bolt cannot be removed, tap the part shown in the figure with a chisel
lightly and bend the processing point back to the steering knuckle side.
2. Install the hub bolt into the wheel hub and install a washer and hub nut on the hub bolt.
3. Tighten the hub nut while holding the wheel hub using a brass bar.