Protege L4-2.0L DOHC (2003)
Back Window Glass: Procedures
Sedan
REAR WINDOW GLASS REMOVAL
1. Remove the headliner.
2. Apply protective tape along the edge of body to protect it from damage.
3. Remove the lip of the rear window molding using a razor.
WARNING: Using a razor with bare hands can cause injury. Always wear gloves when using a razor.
NOTE: The rear window molding is a replacement part.
Not Reusing Rear Window Glass
1. Use a tool like that shown in the figure, and insert the blade into the sealant.
NOTE: For the areas of the sealant that are difficult to cut, use the SST (piano wire) and follow the procedures under "Reusing rear window
glass".
2. Pull through the sealant around the edge of the glass.
