Protege DX L4-1.6L DOHC (2000)
8. Slide the guide backward, and remove it from the sunroof frame.
9. Remove the deflector.
ASSEMBLY
1. Install the deflector.
2. Slide the guide forward, and install it to the sunroof frame.
3. Install the stopper screw.
4. Move the guide by hand until it is tilted up position.
5. Move the link built into the guide by hand until it is aligned with mark A and mark B.
6. Install the sunroof motor.
7. Slide the drip shoe forward, and install it to the sunroof frame.
8. Use IPA (Isopropyl alcohol) to remove any excess repair sealant.
