Protege DX L4-1.6L DOHC (2000)
3. Install and tighten the stop screw.
Tightening torque
2.0 - 2.4 Nm (20 - 25 kgf-cm, 18 - 21 inch lbs.)
STOP PIN (WITH ABS) ASSEMBLY NOTE
1. Install the secondary piston with the piston hole facing the stop pin.
2. Install the new O-ring onto the stop pin
3. Install the stop pin.
Tightening torque
6.87 - 9.80 Nm (70 - 100 kgf-cm, 60.8 - 86.7 inch lbs.)
4. Push and release the secondary piston component to verify that it is held by the stop pin.
